Sony HCD-BC150 Operating Instructions - Page 18
To change the speaker cables, Detaching
View all Sony HCD-BC150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
To change the speaker cables If you want to use a different speaker cable, you can detach the plug for attachment to another cable. Detaching Catcher With the catcher facing down, press and hold the plug down against a flat surface and remove the cords from the plug. Attaching While pressing the plug down against a flat surface, insert the new speaker cords. Note that the cord marked with a line should be attached to the minus (-) side of the plug. Note Be careful not to damage the surface you use (desk, etc.) when attaching/detaching the speaker cords. Tips • You can use any commercially sold speaker cable of gauge cord AWG #18 - AWG #24. • Before attaching a new cable, strip off 10 mm (13/32 in.) of its insulation and twist the bare wires of both cords. 10 mm 18GB