Sony HCD-BC150 Operating Instructions - Page 27
Adjusting the speaker, balance and level by using the, test tone
View all Sony HCD-BC150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Getting Started Narrows the DYNAMIC range of the sound track. Useful for watching movies at low volume late at night. AUDIO DRC DRC OFF: No compression of DYNAMIC range. DRC STD: Reproduces the sound track with the kind of DYNAMIC range that the recording engineer intended. DRC MAX: Fully narrows the DYNAMIC range. Note DYNAMIC range compression only applies to Dolby Digital sources. 9 Press AMP MENU when you have finished making adjustments. Note When you adjust the speaker settings, the sound cuts off for a moment. Adjusting the speaker balance and level by using the test tone 1 Press AMP MENU. 2 Press X/x until "LEVEL" appears in the front panel display, then press ENTER or c. The system enters the Level Menu mode. 3 Press X/x repeatedly to select "T.TONE" in the front panel display, then ENTER or c. 4 Press X or x to select "T.TONE ON" in the front panel display. You will hear the test tone from each speaker in sequence. When you select "T.TONE OFF," this operation will be cancelled. 5 Press C to return "T.TONE". 6 Press X/x to select the item you want to set, then press ENTER or c. 7 Press X/x to adjust the speaker setting value. Press C to return step 6 and follow steps 6 and 7 to adjust other speaker setting values. 8 Set "T.TONE" to "T. TONE OFF" to cancel the test tone function. Test tone sound stops emitting. 27GB