Sony HCD-BC150 Operating Instructions - Page 25

Getting Started Adjusting the speaker settings by using the front panel display on the system You can set speaker settings using the AMP menu displayed in the front panel. AMP menu List SP SETUP CENTER SP SURR SP F DIST CEN DIST SURR DIST CENTER Y CENTER N SURR Y SURR N 1.0 m - 7.0 m/3ft - 23ft 1.0 m - 7.0 m/3ft - 23ft 1.0 m - 7.0 m/3ft - 23ft LEVEL T.TONE T.TONE OFF T.TONE ON F BALANCE 6 steps left or right CEN LEVEL -6 dB - +6 dB SL LEVEL -6 dB - +6 dB SR LEVEL -6 dB - +6 dB SW LEVEL -6 dB - +6 dB AUDIO DRC DRC OFF DRC STD DRC MAX CUSTOMIZE DIMMER ATTENUATE DIM OFF DIM ON ATT OFF ATT ON C/X/x/c 4 5 6 7 8 9 10 0 AMP MENU ENTER 1 Press AMP MENU. 2 Press X/x until the item you want to set appears in the front panel display, then press ENTER or c. x SP SETUP Sets the speaker size and distance. x LEVEL Sets the balance and level of each speaker, sets AUDIO DRC and the test tone (on or off). 3 Press X/x to select the desired item, then press ENTER or c to select the desired setting. 4 Press X/x to select each setting of the desired item. You can set the following items. The default settings are underlined. Note You can set the item of "SP SETUP" and "LEVEL," only when the system is set to "DVD" and in the stop mode or the tray is opened. continued 25GB