Sony HCD-BC150 Operating Instructions - Page 59
Enjoying the Radio, Presetting Radio Stations
View all Sony HCD-BC150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Other Operations Enjoying the Radio Presetting Radio Stations You can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum. "/1 TUNER/ BAND TUNER MENU 1 2 3 4 5 6 7 8 9 10 0 FUNCTION TUNING -/+ 5 Press ENTER. A preset number appears in the front panel display. 6 Press X/x to select the preset number you want. 7 Press ENTER. The station is stored. C/X/x/c ENTER m 1 Press TUNER/BAND repeatedly until the band you want appears in the front panel display. Each time you press TUNER/BAND, the band toggles between FM and AM. 2 Press and hold TUNING + or - until the auto scanning starts. Scanning stops when the system tunes in a station. "TUNED" and "ST" (for stereo program) appear in the front panel display. 3 Press TUNER MENU. 4 Press C/c or X/x repeatedly until "MEMORY" appears in the front panel display. 8 Repeat 1 to 7 to store other stations. To change the preset number Restart from step 1. To change the AM tuning interval (except for Austlarian and Middle Eastern model) The AM tuning interval can be set to either 9 kHz (default) or 10 kHz (for some areas). To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the remote, or press "/1 on the system. While holding down VOLUME - (on the system), press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. continued 59GB