Sony HCD-BC150 Operating Instructions - Page 19
Step 2: Antenna Hookups, Terminals for connecting the antennas
View all Sony HCD-BC150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started Step 2: Antenna Hookups Connect the supplied AM/FM antennas for listening to the radio. Terminals for connecting the antennas Connect the AM loop antenna FM wire antenna To the AM terminal FM 75Ω COAXIAL jack AM loop antenna FRONT R CENTER FRONT L SURR R WOOFER SURR L SPEAKER AUDIO IN Y PB/CB PR/CR R L VIDEO/SAT COMPONENT VIDEO OUT S VIDEO (DVD ONLY) VIDEO MONITOR OUT COAXIAL AM FM 75 FM wire antenna Notes • To prevent noise pickup, keep the AM loop antenna away from the system and other components. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. • When you connect the supplied AM loop antenna, cord (A) or cord (B) can be connected to either terminal. AM A B Tip If you have poor FM reception, use a 75-ohms coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown below. System Outdoor FM antenna COAXIAL AM FM 75 19GB