Sony HDR-CX160 Handycam® Handbook - Page 78
Repair Img. DB F., File Number, Data Code, To prevent data on the internal - flash memory camcorder
UPC - 027242820210
View all Sony HDR-CX160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table of Contents To avoid the loss of important images, you should save them before formatting the recording media. Protected movies and photos will also be deleted. While [Executing...] is displayed, do not close the LCD screen, operate the buttons on the camcorder, disconnect the AC Adaptor, or eject the memory card from your camcorder. (The access lamp is lit or flashing while formatting memory card.) To prevent data on the internal recording media from being recovered (HDR-CX160/CX180) [Empty] allows you to write unintelligible data onto the internal recording media of the camcorder. In this way it may become more difficult to recover any original data. When you dispose of or transfer the camcorder, it is recommended that you perform [Empty]. When the internal recording media is selected on the [Format] screen, touch [Empty]. While deleting data, do not apply any vibrations or shocks to your camcorder. You can check the time that the camcorder will take to delete data on the LCD screen. If you stop performing [Empty] while [Executing...] appears, be sure to complete the operation by performing [Format] or [Empty] when you use the camcorder next time. Repair Img. DB F. See page 88, 92. File Number You can select the way to assign file number of photos. Series Assigns file numbers of photos in sequence. The file number becomes larger each time you record a photo. Even if the memory card is replaced with another one, the file number is assigned in sequence. Reset Assigns file numbers in sequence, following the largest file number existing on the recording medium. When the memory card is replaced with another one, the file number is assigned for each memory card. Enjoy Useful Functions Index Notes Connect the AC Adaptor to the wall outlet (wall socket). You cannot perform [Empty] unless you connect the AC Adaptor to the wall outlet (wall socket). To avoid the loss of important images, they should be saved on a computer or other devices before performing [Empty]. Disconnect all cables except the AC Adaptor. Do not disconnect the AC Adaptor during the operation. Data Code During playback, your camcorder displays the information (Date/Time, Camera Data) recorded automatically at the time of recording. Off Data code is not displayed. Date/Time Displays the date and time. US 78