Sony HDR-CX160 Handycam® Handbook - Page 90
Self-diagnosis display/Warning indicators
UPC - 027242820210
View all Sony HDR-CX160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Table of Contents Copying/Connecting to other devices Images are not copied correctly. You cannot copy images using the HDMI cable (sold separately). The A/V connecting cable is not connected properly. Make sure to connect the cable to the input jack of another device (p. 62). Connecting to a computer Self-diagnosis display/ Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E. Enjoy Useful Functions "PMB" cannot be installed. Check the computer environment or installation procedure required to install "PMB." "PMB" does not work correctly. Quit "PMB" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the Built-in USB Cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. When both the Built-in USB Cable and the USB jack of the camcorder are connected to the external devices at the same time, disconnect one that is not connected to a computer. C:(or E Self-diagnosis display) C:04: The battery pack is not an "InfoLITHIUM" battery pack (V series). Use an "InfoLITHIUM" battery pack (V series) (p. 97). Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 13). C:06: The battery pack temperature is high. Change the battery pack or place it in a cool place. C:13: / C:32: Remove the power source. Reconnect it and operate your camcorder again. E Follow the steps from on page 84. (Battery level warning) The battery pack is nearly used up. Depending on the operating environment or battery conditions, may flash, even if there are about 20 minutes remaining. (Warning indicator pertaining to battery pack temperature) The battery pack temperature is high. Change the battery pack or place it in a cool place. Index US 90