Sony HDR-CX220 "Handycam" User Guide (.PDF) - Page 37

Charging time Approximate time (min.) required to fully charge a fully discharged battery pack. HDR-CX280/ CX280E/ CX290/ CX290E/ CX320/ CX320E/ CX380/ CX380E/ CX390E/ PJ220/ PJ220E/ PJ230/ PJ230E Battery pack AC Adaptor NP-FV30 (supplied) 115 NP-FV50 155 NP-FV70 195 NP-FV100 390 HDR-PJ320E/ PJ380/ PJ380E/ PJ390E Battery pack AC Adaptor NP-FV50 (supplied) 155 NP-FV70 195 NP-FV100 390 The charging times shown in the table above are measured when charging the camcorder at a room temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F). To remove the battery pack Close the LCD screen. Slide the BATT (battery) release lever ( ) and remove the battery pack ( ). To use your camcorder continuously for a long time Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). [Details] By using the AC Adaptor, you can use your camcorder without worrying about the battery running out of charge. Notes on the AC Adaptor Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. Disconnect the AC Adaptor from the camcorder, while holding both the camcorder and the DC plug. Related topics Information on supplied items: Differences in supplied items Expected time of recording and playback with each battery pack Remaining battery indicator: Screen indicators 37