Sony HDR-CX230 Operating Guide - Page 44
On handling the LCD screen, LCD screen
View all Sony HDR-CX230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
When the camcorder is connected to a computer or accessories Do not try to format the recording media of the camcorder with a computer. If you do so, your camcorder may not operate correctly. When connecting the camcorder to another device with communication cables, be sure to insert the connector plug in the correct way. Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of the camcorder. When the camcorder is connected to other devices through a USB connection and the power of the camcorder is turned on, do not close the LCD panel. The image data that has been recorded may be lost. Notes on optional accessories We recommend using genuine Sony accessories. Genuine Sony accessories may not be available in some countries/regions. On handling the LCD screen If you leave fingerprints, hand cream, etc. on the LCD screen, the coating of the LCD screen will come off easily. Wipe those off as soon as possible. If you wipe the LCD screen strongly with a tissue, etc., the coating of the LCD screen may be scratched. If the LCD screen becomes dirty with fingerprints or dust, it is recommended that you gently remove those from the screen then clean it with a soft cloth, etc. GB 44 LCD screen Do not apply excessive pressure on the LCD screen, as it may cause uneven color and other damage. If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction. While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction. To clean the casing and the projector lens (Models with a projector) Wipe the casing and the lens gently with a soft cloth such as a cleaning cloth or eyeglass cleaning cloth. If the casing and the projector lens is very dirty, clean the camcorder casing and the lens with a soft cloth lightly moistened with water, and then wipe the casing and the projector lens with a dry soft cloth. Avoid the following so as not to deform the casing, damage the finish or scratch the lens: Using chemicals such as thinner, benzine, alcohol, chemical cloths, insect repellent, insecticide and sunscreen Handling the camcorder with the above substances on your hands Leaving the camcorder in contact with rubber or vinyl objects for a long period of time About care and storage of the lens Wipe the surface of the lens clean with a soft cloth in the following instances: When there are fingerprints on the lens surface In hot or humid locations When the lens is exposed to salty air such as at the seaside Store in a well-ventilated location subject to little dirt or dust. To prevent mold, periodically clean and store the lens as described above.