Sony HT-7200DH Operating Instructions - Page 32

When warning codes appear During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows: Warning code t blank display t (warning code t blank display)b) t PUSH t blank display t ENTER b)Appears when there are more than one warning code. You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually. To change the settings manually 1 Record down the warning code. 2 Press . 3 Press ?/1 to turn off the receiver. 4 Follow the solution provided in the "Warning codes and solutions" below. 5 Turn on the receiver and perform Auto Calibration again (page 30). Warning codes and solutions Warning Explanation and solution code WARN. 40 The environment is noisy. Make sure the environment is quiet during Auto Calibration. WARN. 50 The center speaker is not connected. Be sure to connect the center speaker. WARN. 51 The surround speakers are not connected. Be sure to connect the surround speakers. WARN. 60 The front speaker balance is out of range. Reposition your front speakers.c) WARN. 62 The center speaker level is out of range. Reposition your center speaker.d) WARN. 63 The surround left speaker level is out of range. Reposition your surround left speaker.d) Warning Explanation and solution code WARN. 64 The surround right speaker level is out of range. Reposition your surround right speaker.d) WARN. 70 The front speaker distance is out of range. Reposition your front speakers.c) WARN. 72 The center speaker distance is out of range. Reposition your center speaker.d) WARN. 73 The surround left speaker distance is out of range. Reposition your surround left speaker.d) WARN. 74 The surround right speaker distance is out of range. Reposition your surround right speaker.d) c)For details, refer "Front speaker distance" (page 45). d)For details, refer "Tip" on page 46. 32US