Sony HT-7200DH Operating Instructions - Page 74
Changing the display, Using the Sleep Timer, All inputs except the FM and AM, band and XM Radio
View all Sony HT-7200DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Changing the display You can check the sound field, etc., by changing the information on the display. Be sure to use the buttons on the receiver for this operation. Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows. All inputs except the FM and AM band and XM Radio Index name of the inputa) t Selected input t Sound field currently applied FM and AM band Preset station namea) t Frequency t Sound field currently applied XM Radio Channel name t Channel number t Category name t Artist name/Feature t Song/program title t Signal strength t Sound field currently applied a)Index name appears only when you have assigned one to the input or preset station (page 55, 73). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. Note Character or marks may not be displayed for some languages. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF When Sleep Timer is activated, the display dims. Note If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled. 74US