Sony HT-7200DH Operating Instructions - Page 84
Specifications, AUDIO POWER
View all Sony HT-7200DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 28). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver. If the problem persist Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Reference sections for clearing the receiver's memory To clear All memorized settings Customized sound fields See page 28 page 51 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 120 - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power Output1) Stereo mode (rated) (6 ohms 1 kHz, THD 1%) 90 W + 90 W Surround mode (reference) (6 ohms 1 kHz, THD 10%) RMS Output2) FRONT: 140 W per channel CENTER: 140 W SURROUND: 140 W per channel 1)Measured under 120 V AC, 60 Hz 2)Reference power output for front, center and surround speakers. Depending on the sound field settings and the source, there may be no sound output. Inputs Analog Sensitivity: 800 mV/ 50 kohms Digital (Coaxial) Impedance: 75 ohms Outputs (Analog) AUDIO OUT Voltage: 800 mV/ 10 kohms SUB WOOFER Voltage: 2 V/1 kohm Tone Gain levels ±6 dB, 1 dB step Reproduction frequency range 28 - 20,000 Hz 84US