Sony HT-7200DH Operating Instructions - Page 7

Getting Started About the indicators on the display 12 3 4 56 SW LFE LCR SL S SR ; D ; PLII ; PL OPT DTS HDMI COAX 78 9 CAT MEMORY ST D.RANGE MONO qf qd qs qa q; Name A SW B LFE C; D D ; PL/ ; PLII E OPT Function Lights up when the audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up when the receiver is decoding Dolby Digital signals. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is set to "AUTO" (page 70). "; PL" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PLII" lights up when the Pro Logic II Movie or Music decoder is activated. Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack (page 70). Name F DTS G CAT H MEMORY I Tuner indicators J Preset station indicators K D.RANGE L COAX Function Lights up when the receiver is decoding DTS signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is set to "AUTO" (page 70). Lights up when category mode is set to "ONE CAT" during XM Radio operation (page 60). Lights up when a memory function, such as Preset Memory (page 54), etc., is activated. Lights up when using the receiver to tune in radio stations (page 52), etc. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 53. Lights up when dynamic range compression is activated (page 41). Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack (page 70). continued 7US