Sony HT-SS2000 Operating Instructions - Page 14

Installing the speakers on a flat surface Before you install the speaker and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Example of HT-SS2000 front speaker Installing the speakers on the wall You can install your speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below. 4 mm (5/32 inch) more than 25 mm (1 inch) 4.5 mm (3/16 inch) HT-SF2000 only You need to attach the supplied foot pads to the center speaker and sub woofer only. HT-SS2000 only You need to attach the supplied foot pads to all the speakers and sub woofer. Installing the speakers on the speaker stand Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm (7/32 to 9/32 inch). HT-SS2000 only For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). Be sure to detach the screw from the speaker and use it when you install the speaker to the speaker stand. For details, refer to operating instructions supplied with the speaker stand. HT-SF2000 only For greater flexibility in positioning the speakers, use the supplied speaker stand. For details, refer to supplied speaker stand installation guide. 14GB 5 to 7 mm (7/32 to 9/32 inch) 3 Hang the speakers on the screws.