Sony HT-SS2000 Operating Instructions - Page 54
Other Operations, Switching between digital and analog audio (IN MODE)
UPC - 027242712133
View all Sony HT-SS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Other Operations Switching between digital and analog audio (IN MODE) You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver. 1 Press AMP MENU. "1-LEVEL" appears on the display. 2 Press V/v repeatedly to select "5-AUDIO". 3 Press menu. or b to enter the 4 Press V/v repeatedly to select "IN MODE". 5 Press or b to enter the parameter. 6 Press V/v repeatedly to select the audio input you want. To return to the previous display Press B. Audio input modes x AUTO IN Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected. x HDMI IN Specifies the audio signals input to the HDMI jack. x COAX IN Specifies the digital audio signals input to the DIGITAL COAX IN jack. x OPT IN Specifies the digital audio signals input to the DIGITAL OPT IN jack. x ANALOG Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Note Some audio input modes may not be set up depending on the input. 54GB