Sony HT-SS2000 Operating Instructions - Page 24
: Preparing the receiver and the remote, Connecting the AC power cord, Performing initial setup - how to reset settings
UPC - 027242712133
View all Sony HT-SS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. AC power cord Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1,2 PRESET TUNING SOUND FIELD MASTER VOLUME MUTING AUTO CAL MIC SUR L CENTER SUBWOOFER To the wall outlet 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. "CLEARING" appears on the display for a while, then "CLEARED" appears. The following items are reset to their factory settings. • All settings in the LEVEL, TONE, SUR, TUNER, AUDIO, VIDEO, SYSTEM and A. CAL menus. • The sound field memorized for each input and preset station. • All sound field parameters. • All preset stations. • MASTER VOLUME is set to "VOL MIN". • Input is set to "DVD". 24GB