Sony HT-SS2000 Operating Instructions - Page 41

Amplifier Operations x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. • DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. • DUAL M (Main) Sound of the main language will be output. • DUAL S (Sub) Sound of the sub language will be output. • DUAL M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. x A.V. SYNC. (Synchronizes audio with video output) Lets you delay the audio output so that the time gap between the audio output and visual display is minimized. You can adjust from 0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps. Notes • This parameter is useful when you use a large LCD or plasma monitor or a projector. • This parameter is not valid when the multi channel PCM signals are received via a HDMI IN jack. x D. ASSIGN (Digital audio input assignment) Lets you assign the digital audio input to other input source. For details, see "Listening to digital sound from other inputs (DIGITAL ASSIGN)" (page 57). x IN MODE (Switching the audio input mode) Lets you set the audio input mode of inputs. For details, see "Switching between digital and analog audio (IN MODE)" (page 54). Settings for the video (VIDEO menu) You can use the VIDEO menu to make various adjustments for HDMI settings. Select "6-VIDEO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 34) and "Overview of the menus" (page 35). VIDEO menu parameters x AUDIO (HDMI AUDIO)* Lets you set the HDMI audio output from the playback component connected to the receiver via a HDMI connection. • AMP The HDMI audio signals from the playback component is only output to speakers connected to the receiver. Multi-channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers. • TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play multi-channel software. • When you connect the receiver to a video component (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". continued 41GB