Sony HT-SS2000 Operating Instructions - Page 58
Using the Sleep Timer, Assignable inputs for digital, audio input
UPC - 027242712133
View all Sony HT-SS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Assignable inputs for digital audio input The initial setting is marked with an underscore. Digital audio Assignable input inputs [Display] Display VIDEO 1 OPTICAL [VD1 OPT] VIDEO 1 VIDEO 2/BD DVD TV SA-CD/CD DVD VIDEO 1 COAXIAL [DVD COAX] VIDEO 2/BD DVD SAT VD1- VD1 VD1- VD2 VD1- DVD VD1- TV VD1- CD DVD- VD1 DVD- VD2 DVD- DVD DVD- SAT TV DVD- TV SA-CD/CD DVD- CD SAT OPTICAL VIDEO 2/BD [SAT OPT] DVD SAT TV SA-CD/CD SAT-VD2 SAT- DVD SAT- SAT SAT- TV SAT- CD Notes • You cannot reassign several digital audio inputs to the same input. • You cannot use the digital audio input for the original input when it is reassigned to another input. • When you reassign the digital audio input, you may need to adjust the IN MODE setting in order to output the sound from the receiver (page 54). • You cannot reassign the digital audio input to TUNER and DMPORT. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF When sleep timer is activated, the display dims and "SLEEP" indicator lights up. Note If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled. 58GB