Sony HT-ST5000 Operating Instructions Large File - 11.43 MB - Page 50
Using the Control for HDMI Function, Preparing to Use the Control, for HDMI Function
View all Sony HT-ST5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the Control for HDMI Function Connecting a device such as a TV or Bluray Disc player compatible with the Control for HDMI function* by HDMI cable enables you to easily operate the device by a TV remote control. The following functions can be used with the Control for HDMI function. • System Power Off function • System Audio Control function • Audio Return Channel • One-Touch Play function • Menu Operation by TV Remote Control • HDMI Standby Through power saving setting Note These functions may work with devices other than those manufactured by Sony, but operation is not guaranteed. * Control for HDMI is a standard used by CEC (Consumer Electronics Control) for allowing HDMI (High-Definition Multimedia Interface) devices to control each other. Preparing to Use the Control for HDMI Function Turn [System Settings] - [HDMI Settings] - [Control for HDMI] on the system to [On] (page 56). The default setting is [On]. Enable the Control for HDMI function settings for the TV and other device connected to the system. Tip If you enable the Control for HDMI ("BRAVIA" sync) function when using a TV manufactured by Sony, the Control for HDMI function of the system is also enabled automatically. When settings are completed, "DONE" appears in the front panel display. System Power Off Function When you turn off the TV, the system will turn off automatically. Set [System Settings] - [HDMI Settings] [Standby Linked to TV] on the system to [On] or [Auto] (page 56). The default setting is [Auto]. Note The connected device may not turn off depending on the status of the device. System Audio Control Function If you turn on the system while you are watching the TV, the TV sound will be output from the speakers of the system. The volume of the system can be adjusted using the TV's remote control. If the TV sound was output from the speakers of the system the previous time you watched the TV, the system will be turned on automatically when you turn on the TV again. Operations can also be made by the TV's menu. For details, refer to the operating instructions of your TV. Notes • Sound is only output from the TV if other than [TV], [HDMI1], [HDMI2] or [HDMI3] input is selected when using the Twin Picture function on the TV. When you disable the Twin Picture function, the sound is output from the system. • The number for the system's volume level is displayed on the TV screen depending on the TV. The volume number displayed on the TV may differ from the number on the front panel display of the system. • Depending on the settings of the TV, the System Audio Control function may not 50US