Sony HT-ST5000 Operating Instructions Large File - 11.43 MB - Page 65
USB Device Connection, You cannot use the NFC function.
View all Sony HT-ST5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Troubleshooting with Low Volume at Midnight (NIGHT)" (page 30). Sound skips or has noise. If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, locate the system apart from it. If there is an obstacle between the main unit and the subwoofer, move or remove it. Locate the main unit and the subwoofer as close as possible. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Switch the network connection of the TV or Blu-ray Disc Player from wireless to wired. USB Device Connection The USB device is not recognized. Try the following: Turn the system off. Remove and reconnect the USB device. Turn the system on. Make sure that the USB device is securely connected to the (USB) port (page 27). Check to see if the USB device or a cable is damaged. Make sure that the USB device is on. If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the system. Mobile Device Connection BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the main unit is lit (page 34). Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this system and the BLUETOOTH device closer together. Pair this system and the BLUETOOTH device again. You may need to cancel the pairing with this system using your BLUETOOTH device first. Pairing information may be deleted. Perform pairing operation again (page 33). Pairing cannot be achieved. Bring this system and the BLUETOOTH device closer together. Make sure this system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. You cannot use the NFC function. The NFC function does not work with BLUETOOTH-compatible headphones. To listen to sound using a BLUETOOTH-compatible headphones, see "Listening to Sound of the Connected TV or Device from Headphones" (page 36). Check that the NFC function for a BLUETOOTH-compatible device is enabled. Sound of the connected BLUETOOTH mobile device is not output from the system. Make sure that the BLUETOOTH indicator of the main unit is lit (page 34). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave 65US