Sony HT-ST5000 Operating Instructions Large File - 11.43 MB - Page 67
Wireless LAN Connection, Internet Connection, Wireless Multi Room, Internet after [Wi-Fi Protected
View all Sony HT-ST5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Troubleshooting Wireless LAN Connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup™ (WPS)] is performed. The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. Make sure the wireless LAN router is on. Check the network connection (page 21) and the network settings (page 58). Depending on the usage environment (including the wall material), radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. Devices that use a 2.4 GHz frequency band, such as a microwave, BLUETOOTH, or digital cordless device, may interrupt communication. Move the main unit away from such devices, or turn off such devices. The wireless LAN connection may be unstable depending on the usage environment, especially while using the BLUETOOTH function of the system. In this case, adjust the usage environment. The wireless LAN router you want is not shown in the wireless network list. Press BACK to return to the previous screen, and try [Wireless Setup] again (page 21). If the wireless LAN router you want is still not detected, select [New connection registration] from the network list, then select [Manual registration] to input a network name (SSID) manually. Internet Connection You cannot connect the system to the Internet. Check the wired or wireless LAN connection. Restart the router or wireless LAN router. Wireless Multi Room The sound is delayed behind the picture. When the sound of the [TV], [HDMI1], [HDMI2], [HDMI3], or [Analog] input is played in the wireless multi room function, the sound is delayed behind the picture. This function is for enjoying the sound of the device that is connected to the system in different rooms. If you are bothered by a time gap between the sound and picture, cancel the wireless multi room function. The wireless multi room function cannot be used on Sony | Music Center. Connect the mobile device to the same network as that of the system. 67US