Sony LBT-GTZ4i Operating Instructions - Page 40
Disc player, Cancel the Sleep Timer function
UPC - 027242752221
View all Sony LBT-GTZ4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Sound comes from one channel, or the left and right volumes are unbalanced. • Place the speakers as symmetrically as possible. • Connect only the supplied speakers. There is severe hum or noise. • A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. • Move the unit away from the source of noise. • Connect the unit to a different wall outlet. • Install a noise filter (commercially available) to the power cord. • Turn off surrounding electrical equipment. The timer does not function. • Check the timer setting and set the correct time (page 36). • Cancel the Sleep Timer function (page 36). • You cannot select the Play Timer and the Recording Timer at the same time. The remote does not function. • Remove the obstacles between the remote and the unit. • Move the remote closer to the unit. • Point the remote at the unit's sensor. • Replace the batteries (R6/size AA). • Move the unit away from the fluorescent light. There is acoustic feedback. • Reduce the volume. • Move the microphone away from the speakers or change the direction of the microphone. Disc player The disc tray does not open and "LOCKED" appears in the display. • Consult your nearest Sony dealer or local authorized Sony service facility. The disc tray does not close. • Load the disc correctly. • Always close the disc tray by pressing Z OPEN/CLOSE. Do not forcibly push the disc tray to close it as this may cause a malfunction. The disc does not eject. • You cannot eject the disc during CD-USB Synchronized Transfer, or REC1 Transferring. Press x to cancel the transferring, then press Z OPEN/CLOSE to eject the disc. • Consult your nearest Sony dealer. Playback does not start. • Open the disc tray and check whether a disc is loaded. • Wipe the disc clean (page 47). • Reload the disc. • Load the disc that this system can play back (page 47). • Load the disc on the disc tray with the label side facing up. • Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. • Press N to start playback. The sound skips. • Wipe the disc clean (page 47). • Reload the disc. • Move the unit to place without vibration (e.g., on top of a stable stand). • Move the speakers away from the unit, or place them on seperate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. 40GB