Sony LBT-GTZ4i Operating Instructions - Page 45

Messages, Locked, No Disc, No Step, Not In Use, Off Time Ng, Push Select, Push Stop, Reading

Get Sony LBT-GTZ4i - CD Changer Mini Shelf System PDF manuals and user guides
UPC - 027242752221
View all Sony LBT-GTZ4i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Additional Information To change the AM tuning interval (except for European models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz, for some areas). You cannot change the AM tuning interval in Power Saving Mode. Use the buttons on the unit for this operation. 1 Select the AM band, and then turn off the system. 2 While holding down ENTER, press "/1. The system turns on automatically and "AM 9K STEP" or "AM 10K STEP" appears. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press x, ENTER, and "/1 at the same time. "COLD RESET" appears in the display. All user-configured settings, such as preset radio stations, timer, and the clock, are reset to factory setting. Messages One of the following messages may appear or flash in the display during operation. Disc/Timer LOCKED: The disc tray does not open. Contact your nearest Sony dealer. NO DISC: There is no disc on the disc tray or you have loaded a disc that cannot be played back on this system. NO STEP: All of the programmed steps have been erased. NOT IN USE: You have pressed a button those operation is not allowed or invalid at this time. OFF TIME NG: The Play Timer or Recording Timer start and stop times are set to the same time. PUSH SELECT: You tried to set the clock or timer during timer operation. PUSH STOP: You tried to perform an operation that can be performed only when the system is stopped. READING: The system is reading information of the disc. Some buttons are not available. SET CLOCK: You pressed CLOCK/ TIMER SELECT (RM-AMU053) before the clock is set. SET TIMER: You pressed CLOCK/ TIMER SELECT (RM-AMU053) before the Play Timer or Recording Timer is set. STEP FULL: You tried to program more than 25 steps. UNLOCK: The disc theft-preventive function is released. Continued l 45GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
45
GB
Additional Information
To change the AM tuning interval
(except for European models)
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use the buttons on the unit for this
operation.
1
Select the AM band, and then turn
off the system.
2
While holding down ENTER, press
"/1
.
The system turns on automatically and
“AM 9K STEP” or “AM 10K STEP”
appears.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To reset the system to factory
settings
If the system still does not operate
properly, reset the system to factory
settings. You cannot reset the system to
factory settings in Power Saving Mode.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
2
Press
x
, ENTER, and
"/1
at the
same time.
“COLD RESET” appears in the
display.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are reset to factory setting.
Messages
One of the following messages may
appear or flash in the display during
operation.
Disc/Timer
LOCKED:
The disc tray does not open.
Contact your nearest Sony dealer.
NO DISC:
There is no disc on the disc
tray or you have loaded a disc that
cannot be played back on this system.
NO STEP:
All of the programmed steps
have been erased.
NOT IN USE:
You have pressed a button
those operation is not allowed or invalid
at this time.
OFF TIME NG:
The Play Timer or
Recording Timer start and stop times
are set to the same time.
PUSH SELECT:
You tried to set the
clock or timer during timer operation.
PUSH STOP:
You tried to perform an
operation that can be performed only
when the system is stopped.
READING:
The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK:
You pressed CLOCK/
TIMER SELECT (RM-AMU053)
before the clock is set.
SET TIMER:
You pressed CLOCK/
TIMER SELECT (RM-AMU053)
before the Play Timer or Recording
Timer is set.
STEP FULL:
You tried to program more
than 25 steps.
UNLOCK:
The disc theft-preventive
function is released.
Continued
l