Sony MDCC-2000 Operating Instructions - Page 21

Switching the Display You can see the various data entered on a disc by pressing the DISPLAY MODE button. DISPLAY MODE A (deck A) DISPLAY MODE B (deck B) Depending on the disc status, the displayed item changes every time you press DISPLAY MODE as follows. Notes • You cannot switch the display in the following cases. - There is no disc inserted - A blank disc is inserted - An error message etc. is displayed In the case of the following messages, however, you can perform the operation below to remove the message and switch the display: "CANNOT PAUSE REC!!" Stop using the remote control to pause. "CANNOT TRANSFER!!" Keep the DISPLAY MODE button on the recording deck pressed down. • When you press the DISPLAY MODE button on the other deck, the deck indicator blinks. This display changes. m DISC TITLE (disc title) m INDEX NAME (index name) m SEP-17-01 (date at top of index) m REC TIME USED* (linear recorded time counter) m REC TIME REMAIN* (remaining recording time counter) m PLAY TIME USED** (linear playback time counter) m PLAY TIME REMAIN** (remaining playback time counter) m TOTAL INDEX (the number of the total index marks) * Not displayed during playback. ** Not displayed during recording. Basic Operations 21