Sony MDCC-2000 Operating Instructions - Page 39

Displayed, Situation

Page 39 highlights

3 DECK A/DECK B display (continued) Displayed COMMAND ERROR!! CPU COMMUNICATION ERROR!! DISC ERROR!! LASER ERROR!! READ ERROR!! (EJECT DISC A) RECORDING ABORT!! SEARCH ERROR!! WRITE ERROR!! (EJECT DISC B) Situation There is a problem with the deck. Turn off the power for 30 seconds and then turn it on again. If the problem persists, contact your dealer. The disc contents cannot be read normally. There is a problem with the deck. Turn off the power for 30 seconds and then turn it on again. If the problem persists, contact your dealer. An error occurred when reading the disc data. Eject disc A. Recording will be interrupted. The specified time cannot be found. An error occurred when writing data onto the disc. Eject disc B. 4 Other messages displayed in the screen during operation Displayed ATTENTION!! (DECK A(B): PUT IN BLANK DISC) BLANK DISC CANNOT COPY!! CANNOT INPUT MORE!! DIFF.RECORD LENGTH DISC FORMAT PRBLM DISC IS FULL! STOP ENTERING DATA. INPUT IS CANCELED AND EXIT NO DISC NOT ORIGINAL INPUT IS VALID AND EXIT OVERFLOW!! PASSWORD INCORRECT!! PB ONLY DISC PROTECTED DISC RECORDED DISC RECORDING DECK WAS EXCHANGED BY SYSTEM!! Situation Quickly insert a blank disc into deck A (B). If you do not, you might not be able to record. A blank disc is inserted. You cannot copy. You cannot enter more characters. The capacity of disc B is insufficient for the prerecorded time of disc A. This is not a disc recorded with the MDCC-2000. The disc is recorded to the end. Stop entering data immediately. The input screen is closed without fixing the input characters. There is no disc inserted in the recorder. This is a digitally copied disc and cannot be used to make another copy. (See page 3.) The input characters are fixed and the input screen is closed. (Sometimes, depending on the conditions, the input characters are not recorded on the disc.) You cannot enter characters. The password entered is incorrect. This disc is for playback only. This is a protected disc. This is a recorded disc. The recording deck was exchanged. Additional Information 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

39
Additional Information
3
DECK A/DECK B display (continued)
Displayed
COMMAND ERROR!!
CPU COMMUNICATION ERROR!!
DISC ERROR!!
LASER ERROR!!
READ ERROR!! (EJECT DISC A)
RECORDING ABORT!!
SEARCH ERROR!!
WRITE ERROR!! (EJECT DISC B)
4
Other messages displayed in the screen during operation
Displayed
ATTENTION!! (DECK A(B): PUT IN BLANK DISC)
BLANK DISC
CANNOT COPY!!
CANNOT INPUT MORE!!
DIFF.RECORD LENGTH
DISC FORMAT PRBLM
DISC IS FULL! STOP ENTERING DATA.
INPUT IS CANCELED AND EXIT
NO DISC
NOT ORIGINAL
INPUT IS VALID AND EXIT
OVERFLOW!!
PASSWORD INCORRECT!!
PB ONLY DISC
PROTECTED DISC
RECORDED DISC
RECORDING DECK WAS EXCHANGED BY SYSTEM!!
Situation
There is a problem with the deck. Turn off the power
for 30 seconds and then turn it on again. If the
problem persists, contact your dealer.
The disc contents cannot be read normally.
There is a problem with the deck. Turn off the power
for 30 seconds and then turn it on again. If the
problem persists, contact your dealer.
An error occurred when reading the disc data. Eject
disc A.
Recording will be interrupted.
The specified time cannot be found.
An error occurred when writing data onto the disc.
Eject disc B.
Situation
Quickly insert a blank disc into deck A (B). If you do
not, you might not be able to record.
A blank disc is inserted.
You cannot copy.
You cannot enter more characters.
The capacity of disc B is insufficient for the
prerecorded time of disc A.
This is not a disc recorded with the MDCC-2000.
The disc is recorded to the end. Stop entering data
immediately.
The input screen is closed without fixing the input
characters.
There is no disc inserted in the recorder.
This is a digitally copied disc and cannot be used to
make another copy. (See page 3.)
The input characters are fixed and the input screen is
closed. (Sometimes, depending on the conditions,
the input characters are not recorded on the disc.)
You cannot enter characters.
The password entered is incorrect.
This disc is for playback only.
This is a protected disc.
This is a recorded disc.
The recording deck was exchanged.