Sony NEX-F3 Handbook - Page 156
Cleaning Mode
View all Sony NEX-F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Table of contents Sample photo Menu Index Cleaning Mode Allows you to clean the image sensor. 1 MENU t [Setup] t [Cleaning Mode] t OK. The message "After cleaning, turn camera off. Continue?" appears. 2 Select OK. The anti-dust is activated automatically. 3 Turn the camera off. 4 Detach the lens. 5 Use the blower to clean the image sensor surface and the surrounding area. 6 Attach the lens. Notes • A blower is not supplied with the camera. Use a commercially available blower. • Cleaning can be performed only when the battery level is (3 remaining battery icons) or more. The use of an AC-PW20 AC Adaptor (sold separately) is recommended. • Do not use a spray blower because it may scatter water droplets inside the camera body. • Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not touch the image sensor. • Hold the camera's face downward to prevent the dust from resettling in the camera. • Do not apply a mechanical shock to the camera during cleaning. • When cleaning the image sensor with a blower, do not blow too hard. 156GB