Sony PEG-UX40 CLIE Handbook - Page 78
Adjusting the Digitizer
View all Sony PEG-UX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Adjusting the Digitizer You need to adjust the digitizer when performing a hard reset, when the tapping operation or scrolling does not work properly, or when you cannot adjust the brightness of the backlight or screen contrast. 1 Tap V at the top right of the Preferences screen, and select [Digitizer]. The Digitizer calibration screen is displayed. This Digitizer calibration screen is the same as the screen displayed the first time you turned on your CLIÉ handheld. Follow the on-screen instructions to adjust the digitizer. Tip Use the stylus perpendicular to the screen to tap targets. Customizing your CLIÉ™ handheld (Preferences) 78
Customizing your CLIÉ™ handheld (Preferences)
78
Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, when the tapping
operation or scrolling does not work properly, or when you cannot adjust the
brightness of the backlight or screen contrast.
1
Tap
V
at the top right of the
Preferences
screen, and select
[Digitizer].
The
Digitizer calibration
screen is displayed.
This Digitizer calibration screen is the same as the screen displayed the
first time you turned on your CLIÉ handheld. Follow the on-screen
instructions to adjust the digitizer.
Tip
Use the stylus perpendicular to the screen to tap targets.