Sony PEG-UX40 CLIE Handbook - Page 79
Setting the Network preferences for a wireless LAN (for PEG-UX50 only)
View all Sony PEG-UX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Setting the Network preferences for a wireless LAN (for PEG-UX50 only) Setting a wireless LAN access point manually 1 Tap V at the top right corner of the Preferences screen, and select [Network]. 2 Tap [V Service:], and select [Wireless LAN]. 3 Tap [Details...]. The Wireless LAN Setup screen is displayed. 4 Tap (Menu). The SSID menu is displayed. 5 Tap [New...] from [SSID]. The SSID Setup screen is displayed. 6 Enter the SSID into [SSID:]. 7 Tap [-Not Used-] next to [WEP Key:]. The WEP Key screen is displayed. 8 Enter WEP Key, and then tap [OK]. The WEP Key screen is closed. 9 Perform the following procedures if necessary: 1 Adhoc mode: Your CLIÉ handheld can communicate directly with other wireless LAN compatible devices without using a wireless LAN access point. To use a wireless LAN communication in this mode, tap next to [Adhoc mode:] to change to . Then, tap [V 1ch], and select the channel number to use for the wireless LAN communication. Customizing your CLIÉ™ handheld (Preferences) Continued on next page 79