Sony STR-K700 Operating Instructions - Page 49
Changing, button, assignments
View all Sony STR-K700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using the Re e Changing button assignments You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the DVD jacks on the receiver, you can set the DVD button on this remote to control the DVD recorder. 1 Hold down the input button of which you want to change the assignment. Example: Press DVD. 2 Referring to the table below, press the corresponding button for the category you want. Example: Press 4. Now you can use the DVD button to control the DVD recorder. Categories and the corresponding buttons Categories Press VCR (command mode VTR 3)a) 1 VCR (command mode VTR 2)a) 2 DVD player/DVD recorder 3 (command mode DVD1)") DVD recorder 4 (command mode DVD3)b) CD player 5 MD deck 6 Tape deck B 7 Tuner (this receiver) 8 DVR (Digital CATV terminal) 9 DSS (Digital Satellite Receiver) 0/10 °Sony VCRs are operated with a VTR 2 or VTR 3 setting which correspond to 8 mm and VHS respectively. b)Sony DVD recorders are operated with a DVD 1 or DVD 3 setting. For details, refer to the operating instructions supplied with the DVD recorders. To clear all remote button assignments Press l/()I , AUTO CAL and MASTER VOL - at the same time. The remote is reset to its factory settings. eicstueu eq BuIsn 49us