Sony STR-K700 Operating Instructions - Page 52

Troubleshooting

Get Sony STR-K700 - Fm Stereo/fm-am Receiver PDF manuals and user guides View all Sony STR-K700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

If color irregularity is observed again... Place the speaker further away from the TV set. If howling occurs Reposition the speakers or turn down the volume on the receiver. On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected correctly and securely. • Check that both the receiver and all components are turned on. • Check that MASTER VOLUME is not set to "VOL MIN". • Check that the headphone is not connected. • Press MUTING to cancel the muting function. • Check that you have selected the correct component with the input buttons. • The protective device on the receiver has been activated. Turn off the receiver, eliminate the short-circuit problem, and turn on the power again. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component. • Check that you have selected the correct component on the receiver. 52us

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
If
color
irregularity
is
observed
again...
Place
the
speaker
further
away
from
the
TV
set.
If
howling
occurs
Reposition
the
speakers
or
turn
down
the
volume
on
the
receiver.
On
cleaning
Clean
the
cabinet,
panel,
and
controls
with
a
soft
cloth
slightly
moistened
with
a
mild
detergent
solution.
Do
not
use
any
type
of
abrasive
pad,
scouring
powder,
or
solvent,
such
as
alcohol
or
benzine.
If
you
have
any
questions
or
problems
concerning
your
receiver,
please
consult
your
nearest
Sony
dealer.
Troubleshooting
If
you
experience
any
of
the
following
difficulties
while
using
the
receiver,
use
this
troubleshooting
guide
to
help
you
remedy
the
problem.
There
is
no
sound,
no
matter
which
component
is
selected,
or
only
a
very
low-level
sound
is
heard.
•
Check
that
the
speakers
and
components
are
connected
correctly
and
securely.
•
Check
that
both
the
receiver
and
all
components
are
turned
on.
•
Check
that
MASTER
VOLUME
is
not
set
to
"VOL
MIN".
•
Check
that
the
headphone
is
not
connected.
•
Press
MUTING
to
cancel
the
muting
function.
•
Check
that
you
have
selected
the
correct
component
with
the
input
buttons.
•
The
protective
device
on
the
receiver
has
been
activated.
Turn
off
the
receiver,
eliminate
the
short-circuit
problem,
and
turn
on
the
power
again.
There
is
no
sound
from
a
specific
component.
•
Check
that
the
component
is
connected
correctly
to
the
audio
input
jacks
for
that
component.
•
Check
that
the
cord(s)
used
for
the
connection
is
(are)
fully
inserted
into
the
jacks
on
both
the
receiver
and
the
component.
•
Check
that
you
have
selected
the
correct
component
on
the
receiver.
52us