Sony STR-K700 Operating Instructions - Page 53

uogetwoiui, leuomppv

Get Sony STR-K700 - Fm Stereo/fm-am Receiver PDF manuals and user guides View all Sony STR-K700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

There is no sound from one of the front speakers. • Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones. If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component. If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound. • Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied). There is no sound from analog 2 channel sources. • Check that the INPUT MODE is not set to "COAX IN" or "OPT IN" for the selected input (page 47). There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is not set to "ANALOG" (page 47). Check that the INPUT MODE is not set to "COAX IN" for the sources from the OPTICAL input jack, or to "OPT IN" for the sources from the COAXIAL input jack. The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the balance parameters using the LEVEL menu. There is severe hum or noise. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet away from a TV set or fluorescent light. • Move your TV away from the audio components. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from the center/ surround speakers. • Select a CINEMA STUDIO EX mode (page 40). • Adjust the speaker level (page 23). There is no sound from the sub woofer. • Check that the sub woofer is connected correctly and securely. The surround effect cannot be obtained. • Make sure the sound field function is on (press MOVIE, or MUSIC). • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS Multi Channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc. to the digital input jacks of this receiver, check the audio setting (settings for the audio output) of the connected component. uogetwoiui leuomppv continued 53us

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
There
is
no
sound
from
one
of
the
front
speakers.
•
Connect
a
pair
of
headphones
to
the
PHONES
jack
to
verify
that
sound
is
output
from
the
headphones.
If
only
one
channel
is
output
from
the
headphones,
the
component
may
not
be
connected
to
the
receiver
correctly.
Check
that
all
the
cords
are
fully
inserted
into
the
jacks
on
both
the
receiver
and
the
component.
If
both
channels
are
output
from
the
headphones,
the
front
speaker
may
not
be
connected
to
the
receiver
correctly.
Check
the
connection
of
the
front
speaker
which
is
not
outputting
any
sound.
•
Make
sure
you
have
connected
to
both
the
L
and
R
jacks
of
an
analog
component,
and
not
only
to
either
the
L
or
R
jack.
Use
an
audio
cord
(not
supplied).
There
is
no
sound
from
analog
2
channel
sources.
•
Check
that
the
INPUT
MODE
is
not
set
to
"COAX
IN"
or
"OPT
IN"
for
the
selected
input
(page
47).
There
is
no
sound
from
digital
sources
(from
COAXIAL
or
OPTICAL
input
jack).
•
Check
that
the
INPUT
MODE
is
not
set
to
"ANALOG"
(page
47).
Check
that
the
INPUT
MODE
is
not
set
to
"COAX
IN"
for
the
sources
from
the
OPTICAL
input
jack,
or
to
"OPT
IN"
for
the
sources
from
the
COAXIAL
input
jack.
The
left
and
right
sounds
are
unbalanced
or
reversed.
•
Check
that
the
speakers
and
components
are
connected
correctly
and
securely.
•
Adjust
the
balance
parameters
using
the
LEVEL
menu.
There
is
severe
hum
or
noise.
•
Check
that
the
speakers
and
components
are
connected
securely.
•
Check
that
the
connecting
cords
are
away
from
a
transformer
or
motor,
and
at
least
10
feet
away
from
a
TV
set
or
fluorescent
light.
•
Move
your
TV
away
from
the
audio
components.
•
The
plugs
and
jacks
are
dirty.
Wipe
them
with
a
cloth
slightly
moistened
with
alcohol.
There
is
no
sound,
or
only
a
very
low-
level
sound
is
heard
from
the
center/
surround
speakers.
•
Select
a
CINEMA
STUDIO
EX
mode
(page
40).
•
Adjust
the
speaker
level
(page
23).
There
is
no
sound
from
the
sub
woofer.
•
Check
that
the
sub
woofer
is
connected
correctly
and
securely.
The
surround
effect
cannot
be
obtained.
•
Make
sure
the
sound
field
function
is
on
(press
MOVIE,
or
MUSIC).
•
Sound
fields
do
not
function
for
signals
with
a
sampling
frequency
of
more
than
48
kHz.
Dolby
Digital
or
DTS
Multi
Channel
sound
is
not
reproduced.
•
Check
that
the
DVD,
etc.
you
are
playing
is
recorded
in
Dolby
Digital
or
DTS
format.
•
When
connecting
the
DVD
player,
etc.
to
the
digital
input
jacks
of
this
receiver,
check
the
audio
setting
(settings
for
the
audio
output)
of
the
connected
component.
uogetwoiui
leuomppv
continued
53us