Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 14

STEP 6: Installing the TDM-NC1 Preparing the remote Pull out the insulating sheet to allow power to flow from the battery. The remote already contains a battery. • Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. Tip When the remote can no longer operate the TDM-NC1, replace the battery with a new one. WARNING Battery may explode if you mistreated. Do not recharge, disassemble or dispose of in fire. To replace the battery in the remote 1 Slide out and remove the battery case. 2 Insert a new lithium battery CR2025 with the + side facing up. A lithium battery CR2025 3 Slide the battery case back in. Note If you do not use the remote for a long period of time, remove the battery to avoid possible damage from battery leakage and corrosion. Notes on lithium battery • Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. • Wipe the battery with a dry cloth to assure a good contact. 14GB