Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 20

STEP 8: Checking the Operation N ENTER ./> +/- 3 Press . or > repeatedly until "Mcrew Server v2 on XXXX (your computer name)" appears, then press ENTER. 4 Press N and check that music or sample music is played. Notes • When playing the sample music, the unit display is shown below. 1 Make sure the display message of the unit. The message "Configuring" appears, then "Loading" follows and then disappears. Go to step 4. If "SERVER?" appears, go to step 2. Notes • If "Check Net" appears, check the network settings in STEP 7. Or, the wireless signal may be weak or out of range, move the unit closer to the wireless access point. • If "No Server" appears, do the following; - Make sure the Firewall setting are correct. - Right click the M-crew Server task tray icon in the computer's task tray, then select [Stop Music Service], and right click the icon again. Then, select [Start Music Service] to restart the M-crew Server. - Restart your computer. - Execute "DataBaseClear.exe" to initialize the database (usually located in C:\Program Files\Mcrewserver). - Input the wireless network key numbers/ characters again. • If the "Configuring" or "Loading" messages do not disappear after a few minutes, or other messages mentioned above appear, see page 35. 2 Press ENTER. * * This icon appears when connecting the unit by wireless connection. • If no sound is heard, check if the connected AV system's volume is set to zero, or the AV system's function is set to other than DMPORT. • If you have a problem, see "Troubleshooting" (page 34). 20GB