Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 26

Listening to the same music in different rooms - PARTY MODE If you have more than one TDM-NC1/CPFIX001, you can enjoy listening to the same music in different rooms. Register one TDM-NC1/CPF-IX001 as the 'host' unit, and the other(s) TDM-NC1/CPFIX001 can play the same music as 'guest' unit(s). ENTER MENU ./> • Depending on the environment, some guest units may lag in playback or cannot play. If this occurs, remove those guest units. Using the PARTY MODE 1 Turn on the connected AV system with DIGITAL MEDIA PORT interface (Sony DAV series, etc.) in each room. 2 Make sure each unit is connected to the network. 3 Make sure the host unit is connected to the media server in stop mode. The following steps 4-6 are for the host unit only. 4 Press MENU. 5 Press . / > until "PARTY MODE?" appears, then press ENTER. "START?" appears. 6 Press ENTER. "Searching" appears. Wait until "Searching" disappears. Notes • If you use CPF-IX001, you need to perform firmware updates from the following Sony websites: USA: http://esupport.sony.com/?ref=http%3A// www.sony.com/index.php Canada: http://www.sony.ca/sonyca/view/english/warranty/ consumer_support.shtml Europe: http://support.sony-europe.com/main/main.asp?l=en • You cannot use the WEB RADIO function in PARTY MODE. • Guest unit operations are restricted. • You can add up to four guest units, but depending on the connection environment, the number of connectable guest units may be fewer. Stopping the PARTY MODE The following procedures are for the host unit only. 1 Press MENU. 2 Press . / > until "PARTY MODE?" appears, then press ENTER. "END?" appears. 3 Press ENTER. Blocking guest units from joining the PARTY MODE You can block some guest units from joining the PARTY MODE. The default setting is unblocked. The following procedures are for the guest units unit which you want to block. 1 Press MENU. 2 Press . / > until "PARTY MODE?" appears, then press ENTER. 26GB