Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 17
Case A: Wired connection, setting up by the unit, Go to STEP - wifi
UPC - 027242710900
View all Sony TDM-NC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Case A: Wired connection 1 Connect the unit to the network using a wired connection. Connect the unit to your router (hub) or directly to the LAN port of the computer. Use the network cable (not supplied). Check that the WIRELESS/WIRED selector on the unit is set to WIRED. Network cable (not supplied) To router (hub) or LAN port of the computer To LAN port WIRELESS WIRED WIRELESS/ WIRED selector Notes • When using the unit with a fixed IP address, refer to "Advanced Network Settings" (page 31). • When connecting the unit to the computer directly, set the IP address of computer to "Automatic Private IP Addressing". After turning on the computer, "Configuring" appears in the unit display window for a few minutes. • In some cases, a message indicating that the connection is limited, or not available, will appear in the lower right portion of the computer; however, the unit will operate normally. 2 Turn on the AV system, and set the AV system's function to DMPORT. 3 Go to STEP 8 (page 20). Case B: Wireless connection (setting up by the unit) 1 Set the WIRELESS/WIRED selector on the unit to WIRELESS. 2 Turn on the AV system, and set the AV system's function to DMPORT. 3 Confirm the settings of your wireless system. Check the following items of your wireless LAN router to set the same information for the TDM-NC1. SSID (Wireless Network Name If your wireless LAN router security is enabled, Wireless Network Key Tips • For details on how to check the wireless LAN router settings, refer to the operation manual of your wireless LAN router. • In some case, SSID name and wireless network key numbers/characters are often written on the wireless LAN router. • Check that your wireless LAN router uses the latest firmware version. For details, refer to the operation manual of your wireless LAN router. 4 Press MENU. 5 Press . or > repeatedly until "Wi- Fi SETUP?" appears in the unit display window, then press ENTER. "SSID?" appears. 6 Press ENTER. "Searching" appears. 7 Press . or > repeatedly until your wireless LAN router SSID name appears, then press ENTER. If you set the wireless network key in the wireless LAN setting, "KEY?" appears. Press ENTER. If you do not set the wireless network key, the unit restarts, go to STEP 8 (page 20). 17GB