Sony TDM-NC1 Operating Instructions (Large File - 10.48 MB) - Page 33

Registering the TDM-NC1 on your computer manually When the unit is connected to your computer after installing the M-crew Server Ver. 2.5 software, the unit is registered automatically on your computer. Register the unit on your computer manually for higher security. 1 Select "REGISTER?" in the network menu (page 31), then press ENTER. The count down display appears in the display of the unit. 2 Click [Start] - [All programs] - [M-crew Server] - [TOOLS] - [EQUIPMENT LIST] in that order to display the screen on the M-crew Server Ver. 2.5. For details, see the "M-crew Server Ver. 2.5" Installation Instructions included on the supplied CD-ROM. 3 During displaying the count down display, set "Equipment selection mode" to "Manual", and then click [Add] on your computer. The registration starts. "Complete!" appears in the display of the unit when the registration is completed. Notes • When the registration is incomplete, "Incomplete!" appears in the display of the unit. • Step 3 must be performed within 5 minutes after performing step 1. Checking network settings 1 Select "NET INFO?" in the network menu (page 31), then press ENTER. 2 Press . or > repeatedly to select the item that you want to check, then press ENTER. Each time you press ENTER, the display changes cyclically as follows: NET TYPE? t AUTO* t IP ADDRESS? t IP address* t SUBNET MASK? t Subnet mask* t GATEWAY? t Default Gateway* t MAC ADDRESS? t MAC address t SERVER NAME? t Connected server* t MY NAME? t Name assigned* * The display may differ depending on the settings. 33GB