Symphonic 19TVCRMKIIIS Owner's Manual - Page 25

STILL FRAME DURING PLAYBACK If you press PAUSE button during playback with tapes recorded in EP mode, the picture will "freeze" on the screen. You may use this feature to study details of a particular scene. Press PLAY button again to continue playback. If you use the PAUSE button during playback with tapes recorded in the SP or LP mode, it may cause the noise bars to appear more than with tapes recorded in the EP mode. This is not an indication of VCR trouble. Note: The VCR will automatically switch to the Stop mode, if it is left in the PAUSE/STILL mode for more than five minutes. NOISE CANCELLING If you use the PAUSE button to freeze the picture during playback, usually there will be video "noise" lines on the screen. This is normal, however, this VCR has a special feature that allows you to reposition or reduce the lines. Each time you press the PAUSE button the lines will change position on the screen. This enables you to see the picture in its entirety without distracting noise lines. TRACKING CONTROL KNOB When the noise appears during playback, adjust the TRACKING control to achieve the best picture. noTRACKING Note: For tapes recorded on your VCR, the center setting is usually best. Tapes recorded on other VCRs may required adjustment. If you encounter video "noise" during playback adjust the knob to the right or left to achieve the best picture. - 25 -