TEAC TN-280BT Owners Manual English Francais Espanol Deutsch Italiano Nederlan - Page 8
Basic operation, Playing records, When playback finishes - cartridge
View all TEAC TN-280BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NG NG NG Playing records oo Remove the protective cap from the cartridge stylus before using the turntable. 1 Press the STANDBY/ON button on the back of the unit to turn it on. 2 Open the dust cover slowly. Basic operation 4 Set the rotation speed (RPM) according to the record. The rotation speed can be set to 33 1/3 or 45 RPM. 7 Raise the tonearm lifter. TI-SKATI 5 Turn the START/STOP rotation knob to START to start the turntable. Tonearm lifter Tonearm oo You can also leave the tonearm lifter down and move the raised tonearm over the record and then lower the tonearm slowly to start playback. 8 Move the tonearm to the edge of the record or the track where you want to start playback. AN 0 3 AN 0 3 When playback finishes 1 Lift the tonearm lifter or the headshell hook and return the tonearm to its resting position. TI-SKATI Tonearm lifter Tonearm VV Be careful not to pinch your fingers, for example, when opening and closing the dust cover. 3 Place a record on the turntable (platter). When playing a 45 RPM large-hole single record, use the included adapter. 8 AN 0 3 oo When the START/STOP rotation knob is set to START, the turntable will start rotating and the blue LED will light. 6 Move the tonearm clasp to the right to release the tonearm. TI-SKATI Clasp 9 Use the tonearm lifter to lower the tonearm. The tonearm lowers slowly until the stylus touches the record and playback begins. oo Close the dust cover during playback. Since doing this prevents skipping caused by unintended contact and blocks external sound pressure, it makes noise less likely to occur. VV Do not place anything on the dust cover.N ATTENTION oo During playback, do not touch the tonearm or the rotating record. Doing so could damage the stylus tip and cause scratches on the record. oo Do not forcibly stop turntable rotation during playback. Since this product is not a turntable designed for DJs (direct drive), doing something like this could cause malfunction. If the volume is too loud during record playback, vibration from speakers could be transmitted to the stylus, causing loud feedback. If this happens, lower the volume of the amplifier. 2 Turn the START/STOP rotation knob to STOP to stop the turntable. oo When the turntable stops, the blue LED will also become unlit.