TEAC TN-400S TN-400S manual multi-lingual - Page 15
Basic operation
View all TEAC TN-400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH D USB port (USB B type) The sound of the record is converted to digital (resolution up to 48 kHz/16-bit) and output. Recording on a computer is possible by connecting this to a USB port on the computer using a USB cable (page 16). Playing records 1 Press the STANDBY/ON button on the back of the unit to turn it on. E DC input connector After completing all other connections, connect the included AC adapter (GPE053A-V120050-Z) to this connector. Confirm that the power plug of the AC adapter is plugged into a power outlet. oo Unplug the power cord from the outlet when you are not planning to use the unit for an extended period of time. oo Do not use any AC adapter other than the one included (GPE053A-V120050-Z). VV Be sure to connect the power cord to an AC outlet that supplies the correct voltage. Connection to an outlet that supplies incorrect voltage could cause fire or electric shock. VV Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power cord. VV Unplug the power cord from the outlet when you are not planning to use the unit for an extended period of time. 2 Open the dust cover slowly. VV Be careful not to pinch your hand, for example, when opening and closing the dust cover. 3 Raise the cartridge protector. F STANDBY/ON button Press the STANDBY/ON button to turn the unit on or put it in standby. Protector 4 Place a record on the turntable (platter). When playing a 45 RPM large-hole single record, use the included adapter. NG Basic operation 5 Select the rotation speed indicated on the record. The rotation speed can be set to 33 1/3, 45 or 78 RPM. 9 Move the tone arm to the track where you want to start playback. AN 0 3 NG 6 Turn the START/STOP rotation knob to START to start the turntable (platter). oo When the START/STOP rotation knob is set to START, the turntable (platter) will start rotating and the blue START lamp will light. 7 Slide the tone arm clasp to the right to remove it. TI-SKATI Clasp 10 Lower the arm lifter. Lower the tone arm slowly until the stylus touches the record and playback begins. oo Close the dust cover during playback. Doing so reduces the occurrence of noise by preventing skipping caused by unintended contact and blocking external sound pressure. VV Do not place anything on the dust cover. ATTENTION oo During playback, do not touch the tone arm or the record. Doing so could damage the stylus tip and cause scratches on the record. oo Do not forcibly stop turntable (platter) rotation during playback. Since this product is not a turntable designed for DJs (direct drive), doing something like this could cause malfunction. During record playback, feedback could occur if the volume is too loud. If this happens, lower the volume of the amplifier. 8 Raise the arm lifter. TI-SKATI AN 0 3 Arm lifter Tone arm oo You can also move the tone arm to above the record without raising the arm lifter and then slowly lower the tone arm to start playback. 15