TP-Link AC1750 Archer C7 V3 User Guide US - Page 43
MAC Clone - reset
View all TP-Link AC1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Archer C7 AC1750 Wireless Dual Band Gigabit Router The router cannot detect PPTP/L2TP/Big Pond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 4.4.2 LAN Choose menu "Network → LAN", you can configure the IP parameters of the LAN on the screen as below. Figure 4-11 LAN MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed. IP Address - Enter the IP address of your router or reset it in dotted-decimal notation (factory default: 192.168.0.1). Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: 1) If you change the IP Address of LAN, you must use the new IP Address to log in the router. 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time,while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.4.3 MAC Clone Choose menu "Network → MAC Clone", you can configure the MAC address of the WAN on the screen below, Figure 4-12: Figure 4-12 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. - 32 -