TP-Link AC1750 Archer C7 V3 User Guide US - Page 46
Wireless Settings
View all TP-Link AC1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Archer C7 AC1750 Wireless Dual Band Gigabit Router 4.6.1 Wireless Settings Choose menu "Wireless 2.4GHz → Wireless Settings", you can configure the basic settings for the wireless network of 2.4GHz on this page. Figure 4-16 Wireless Settings - 2.4GHz Wireless Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. When you select your local region from the drop-down list, click the Save button, then the Note Dialog appears. Click OK. Note: Note Dialog Limited by local law regulations, version for North America does not have region selection option. Mode - This field determines the wireless mode which the router works on. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It is strongly recommended that you set the Mode to 802.11bgn mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the router. - 35 -