TP-Link AC2800 User Guide - Page 20
More Operation Modes, 4. 5. 1. Wireless Router Mode
View all TP-Link AC2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 4 Set Up Internet Connections 5. Scroll down the page, enable IPv6, and configure the IPv6 parameters. • Addressing Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC). SLAAC is the most commonly used addressing type. • IPv6 Default Gateway: Keep the default setting as Current Connection. Note: If your ISP has provided the IPv6 address, click Advanced to reveal more settings. Check to use IPv6 specified by ISP and enter the parameters provided by your ISP. 6. Click OK to make the settings effective. Now IPv6 service is available for your network. 4. 5. More Operation Modes The modem router supports two more operation modes: Wireless Router mode and 3G/4G Router mode. You can change the mode according to your needs. 4. 5. 1. Wireless Router Mode If you already have a modem or your internet comes via an Ethernet jack on the wall, you can set up the modem router as a regular wireless router to share the internet. 1. Find the WAN port (labeled as LAN4/WAN) on the modem router, and connect it to your existing modem or the Ethernet jack on the wall. Then connect the power adapter and turn on the modem router. If you connect an existing modem, reboot it to get the modem router connected to the internet. 2. Connect your computer to the modem router. For details, refer to Connect Your Modem Router. 3. Visit http://tplinkmodem.net, and log in with the account you set for the modem router. 4. Go to Advanced > Operation Mode, select the Wireless Router Mode, and click Save. The modem router will reboot. 16