TP-Link AC2800 User Guide - Page 92
Advanced, Wireless, Advanced Settings, Beacon Interval, RTS Threshold, DTIM Interval
View all TP-Link AC2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Chapter 14 Specify Your Network Settings 2. Go to Advanced > Wireless > Advanced Settings page. • Beacon Interval: Enter a value between 25 and 1000 in milliseconds to determine the duration between which beacon packets are broadcasted by the router to synchronize the wireless network. The default is 100 milliseconds. • RTS Threshold: Enter a value between 1 and 2346 to determine the packet size of data transmission through the router. By default, the RTS (Request to Send) Threshold size is 2346. If the packet size is greater than the preset threshold, the router sends Request to Send frames to a particular receiving station and negotiates the sending of a data frame, or else the packet will be sent immediately. • DTIM Interval: Enter a value between 1 and 255 to determine the interval of the Delivery Traffic Indication Message (DTIM). 1 indicates the DTIM Interval is the same as Beacon Interval. • Group Key Update Period: Enter the number of seconds to control the time interval for the encryption key automatic renewal. The default is 0, indicating no key renewal. • WMM: This feature guarantees the packets with high-priority messages being transmitted preferentially. WMM is enabled compulsively under 802.11n or 802.11ac mode. • Short GI: This feature is enabled by default and recommended to increase the data capacity by reducing the Guard Interval (GI) time. • AP Isolation: Select this check box to enable the AP Isolation feature that allows you to confine and restrict all wireless devices on your network from interacting with each other, but still able to access the internet. AP isolation is disabled by default. 88