TP-Link T1600G-18TS Jetstream Smart Switches User Guide - Page 73

Managing System System Tools Configurations Step 2 boot application filename { image1 | image2 } { startup | backup } Specify the configuration of the boot file. By default, image1.bin is the startup image and image2.bin is the backup image. image1 | image2: Select the image file to be configured. startup | backup: Select the property of the image file. Step 3 boot config filename { config1 | config2 } { startup | backup } Specify the configuration of the boot file. By default, config1.cfg is the startup configuration file and config2.cfg is the backup configuration file. config1 | config2: Select the configuration file to be configured. startup | backup: Specify the property of the configuration file. Step 4 show boot Verify the boot configuration of the system. Step 5 end Return to privileged EXEC mode. Step 6 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the next startup image as image1, the backup image as image2, the next startup configuration file as config1 and the backup configuration file as config2. Switch#configure Switch(config)#boot application filename image1 startup Switch(config)#boot application filename image2 backup Switch(config)#boot config filename config1 startup Switch(config)#boot config filename config2 backup Switch(config)#show boot Boot config: Current Startup Image - image2.bin Next Startup Image - image1.bin Backup Image - image2.bin Current Startup Config - config2.cfg Next Startup Config - config1.cfg Backup Config - config2.cfg Switch(config)#end User Guide 48