TP-Link T1600G-18TS Jetstream Smart Switches User Guide - Page 889

Configuring SNMP & RMON SNMP Configurations Step 2 Step 3 Step 4 Step 5 snmp-server view name mib-oid {include | exclude} Configure the view. name: Enter a view name with 1 to 16 characters. You can create multiple entries with each associated to a MIB object. A complete view consists of all MIB objects that have the same view name. mib-oid: Enter the MIB object ID with 1 to 61 characters. When a MIB Object ID is specified, all its child Object IDs are specified. For specific ID rules, refer to the device related MIBs. include | exclude: Specify a view type. Include indicates that objects of the view can be managed by the NMS, while exclude indicates that objects of the view cannot be managed by the NMS. show snmp-server view Displays the view table. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to set a view to allow the NMS to manage all function. Name the view as View: Switch#configure Switch(config)#snmp-server view View 1 include Switch(config)#show snmp-server view No. View Name Type MOID 1 viewDefault include 1 2 viewDefault exclude 1.3.6.1.6.3.15 3 viewDefault exclude 1.3.6.1.6.3.16 4 viewDefault exclude 1.3.6.1.6.3.18 5 View include 1 Switch(config)#end Switch#copy running-config startup-config 2.2.3 Creating SNMP Communities (For SNMP v1/v2c) For SNMPv1 and SNMPv2c the Community Name is used for authentication, functioning as the password. User Guide 864