TP-Link T1600G-18TS Jetstream Smart Switches User Guide - Page 86

Managing System Figure 6-5 Configuring System Power Limit PoE Configurations (Only for Certain Devices) Unit Displays the unit number. System Power Limit Specify the maximum power the PoE switch can supply. By default, it is 384 W for T1600G-52PS and 250 W for TL-SG2428P. 2) In the Port Config section, select one or more ports and configure the following two parameters: Time Range and PoE Profile. Click Apply and the PoE parameters of the selected PoE Profile, such as PoE Status and PoE Priority, will be displayed in the table. PoE Status Displays the PoE function for the corresponding port. The port can supply power to the PD when its status is enable. PoE Priority Displays the priority level for the corresponding port. When the supply power exceeds the system power limit, the switch will power off PDs on low-priority ports to ensure stable running of other PDs. Power Limit Displays the maximum power the corresponding port can supply. Power Limit Value (0.1-30.0 W) Displays the power limit value. Time Range Select a time range, then the port will supply power only during the time range. For how to create a time range, refer to Time Range Configuration. PoE Profile Select the PoE profile for the desired port. If one profile is selected, you will not be able to modify PoE status, PoE priority or power limit manually. Power (W) Displays the port's real-time power supply. Current (mA) Displays the port's real-time current. Voltage (V) Displays the port's real-time voltage. PD Class Displays the class the linked PD belongs to. Power Status Displays the port's real-time power status. User Guide 61