TP-Link T1600G-18TS Jetstream Smart Switches User Guide - Page 89
Configuring the PoE Parameters Using the Profile, Interface, Powerw, CurrentmA, Voltagev, PD-Class
View all TP-Link T1600G-18TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Managing System PoE Configurations (Only for Certain Devices) Switch(config-if)#show power inline information interface gigabitEthernet 1/0/5 Interface Power(w) Current(mA) Voltage(v) PD-Class Power-Status Gi1/0/5 1.3 26 53.5 Class 2 ON Switch(config-if)#end Switch#copy running-config startup-config 6.2.2 Configuring the PoE Parameters Using the Profile Follow these steps to configure the PoE profile: Step 1 Step 2 Step 3 Step 4 configure Enter global configuration mode. power inline consumption power-limit Specify the maximum power the PoE switch can supply globally. power-limit: Specify the maximum power the PoE switch can supply. For T1600G-52PS, it ranges from 1.0-384.0 W, and the default value is 384.0 W. For TL-SG2428P, it ranges from 1.0-250.0 W, and the default value is 250.0 W. power profile name [ supply { enable | disable } [ priority { low | middle | high } [ consumption { power-limit | auto | class1 | class2 | class3 | class4 } ] ] ] Create a PoE profile for the switch. In a profile, the PoE status, PoE priority and power limit are configured. You can bind a profile to the corresponding port to quickly configure the PoE function. name: Specify a name for the PoE profile. It ranges from 1 to 16 characters. If the name contains spaces, enclose the name in double quotes. enable | disable: Specify the PoE status for the profile. By default, it is enable. low | middle | high: Select the priority level for the profile. When the supply power exceeds the system power limit, the switch will power off PDs on low-priority ports to ensure stable running of other PDs. power-limit | auto | class1 | class2 | class3 | class4: Select or enter the maximum power the corresponding port can supply. The following options are provided: Auto represents that the switch will assign a value of maximum power automatically. Class1 represents 4W, Class2 represents 7W, Class3 represents 15.4W and Class4 represents 30W or you can enter a value manually. The value ranges from 1 to 300. It is in the unit of 0.1 watt. For instance, if you want to configure the maximum power as 5W, you should enter 50. interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list } Enter Interface Configuration mode. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, for example 1/0/1-3, 1/0/5. User Guide 64