TP-Link T1600G-18TS Jetstream Smart Switches User Guide - Page 916

Configuring SNMP & RMON RMON Configurations Switch#copy running-config startup-config 5.2.2 Configuring History Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter Global Configuration Mode. rmon history index interface { fastEthernet port | gigabitEthernet port | tengigabitEthernet port } [ interval seconds ] [ owner owner-name ] [ buckets number ] Configuring RMON History entries. index: Specify the index of the History entry, which ranges from 1 to 12. To configure multiple indexes, enter a list of indexes separated by commas, or use a hyphen to indicates a range of indexes. For example, 1-3, 5 indicates 1, 2, 3, 5. port: Specify the port to be bound to the entry. seconds: Set the sample interval. The values are from 10 to 3600 seconds, and the default is 1800 seconds. owner-name: Enter the owner name of the entry with 1 to 16 characters. The default name is monitor. number: Set the maximum number of records for the history entry. When the number of records exceeds the limit, the earliest record will be overwritten. The values are from 10 to 130; the default is 50. show rmon history [ index ] Displays the specified History entry and related configurations. To show multiple entries, enter a list of indexes separated by commas, or use a hyphen to indicates a range of indexes. For example, 1-3, 5 indicates 1, 2, 3, 5. index: Enter the index of History entry that you want to view. Valid values are from 1 to 12. The command without any parameters displays all existing statistics entries. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to create a History entry on the switch to monitor port 1/0/1. Set the sample interval as 100 seconds, maximum buckets as 50, and the owner as monitor: Switch#configure Switch(config)#rmon history 1 interface gigabitEthernet 1/0/1 interval 100 owner monitor buckets 50 Switch(config)#show rmon history User Guide 891