TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 200

Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the switch to forward LLDP messages when LLDP function is disabled globally: T1600G-28TS(config)#lldp forward_message 21.3 lldp hold-multiplier Description The lldp hold-multiplier command is used to configure the Hold Multiplier parameter. The aging time of the local information in the neighbor device is determined by the actual TTL value used in the sending LLDPDU. TTL = Hold Multiplier * Transmit Interval. To return to the default configuration, please use no lldp hold-multiplier command. Syntax lldp hold-multiplier multiplier no lldp hold-multiplier Parameter multiplier -- Configure the Hold Multiplier parameter. It ranges from 2 to 10. By default, it is 4. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify Hold Multiplier as 5: T1600G-28TS(config)#lldp hold-multiplier 5 179