TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 368

tos-value --Specify an IP ToS value to be matched between 0 and 15. pre-value --Specify an IP Precedence value to be matched between 0 and 7. protocol -- Specify a protocol type. s-port-number -- Specify the source port number. s-port-mask -- Specify the source port mask with 4 hexadecimal numbers. d-port-number -- Specify the destination port number. d-port-mask -- Specify the destination port mask with 4 hexadacimal numbers. tcpflag -- For TCP protocol, specify the flag value using either binary numbers or * (for example, 01*010*). The default is *, which indicates that the flag will not be matched. The flags are URG (Urgent flag), ACK (acknowledge flag), PSH(push flag), RST(reset flag),SYN(synchronize flag), and FIN(finish flag). time-range-name -- The name of the time-range. The default is No Limit. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create IP ACL 600, and configure Rule 1 to permit packets with source IP address 192.168.1.100: T1600G-28TS (config)#access-list create 600 T1600G-28TS (config)#access-list ip 600 rule 1 permit logging disable sip 192.168.1.100 sip-mask 255.255.255.255 40.5 access-list combined Description The access-list combined command is used to add Combined ACL rule. To delete the corresponding rule, please use no access-list extended command. 347